Carbon Road Bike Rim 700C Clincher Bicycle Carbon Rim 50mm Depth Road Rim Tubeless
| ATTENTION!
Please select the options you need when buying. Each option only represents the height and width of the rim. If you need tubelss / clincher / tubular rims. After you pay, please leave us a message and tell me about more details .
about more details,we need to know the following options Rims: Modle:YAR50-06
Size:700C
Use:Road rim brake
Type:tubeless
Inner width:19.5mm
Outer width:29mm
Depth:50mm
ERD:538.5mm (not including nipple head dimension)
Weight:530+/-15g(clincher&tubeless)
Weight Limit:130kg
Spoke holes:16/18/20/21/24/28/32H
Spoke Hole Angle±7°
Spoke Tension:100 ~110kgf (radial) /115 ~130kgf (disc) front, 120~130kgf rear
Tyre Pressure:130psi recommended max
Tire:23C~33C recommended
TECHNOLOGY
CHA/Customized spoke hole angle All spoke hole angles must be customized according to the geometric angle of the hub.all drilled holes are inspected to ensure they are free of burrs.You can request a customized drilling pattern if you have a unique wheel build. TRD/Tubeless R angle design All yuan an bike are tubeless compatible.We design a R angle,The rounded edge makes tire installation easier and offers increased support during hard cornering with a softer edge and larger surface area. LMS/lighter materials improve the strength We use lighter materials and make full use of the combination of T700 and T800 to improve the strength. SIW/smooth Inside Wall We use a specific, thinner, high-pressure air bladders to control the inner wall smoothness, and the inner wall air bladders can be extracted clean at one time, without residue, not only effectively improve the tightness of the carbon fiber yarn, but also allow the spoke cap to be more tightly integrated with the spoke hole OPT/one piece technology Compared to the technology of 3 piece, our one piece tech is more technically difficult and takes longer to produce, but the rigidity of the rim is at least 7% higher BLT/Bead Lock technology The bump on the rim bed helps to create a buffer during tire inflation, making the mounting process easier. When the tire is mounted, the raised portion reinforces the tire bead, making it harder to "burp" or fall back into the drop channel Check more technology
|
|
|
|
|
|
|
|
|
|
|
|
